Products

Notes for Intrinsically Safe Applications

Specifying Sensors for Ex ia Circuits
All thermocouple and RTD sensors shown in this catalogue are suitable for use in intrinsically safe (IS) applications to Zone 0 when used with an appropriate barrier. The full classification is Ex II 1 G Ex ia IIC Ga. The mineral insulated construction gives suitable insulation resistance between conductors (minimum 1000 M Ω) to guarantee conformance.

The barrier isolates the signal from the hazardous area and no further certification of the sensor is necessary.

When a 4~20mA transmitter is selected this is also Ex ia approved. When specifying sensors for IS areas please add IS after the type reference i.e. 52-IS and we will provide the following documentation with the order:
  • TC Ltd Ex ia certificate of conformity & letter of conformity from TrAC Global Ltd (our notified body)
  • Ex ia tags
  • ATEX certificate for transmitter (if required)
  • All cables are supplied with blue outer sheath
  • All terminal heads are supplied in stainless steel (die cast alloy is not permitted in IS areas)
BACK TO TOP
ATEX/IECEx Thermocouples with Pot Seal

ATEX/IECEx Thermocouples with Die Cast Alloy Head

ATEX/IECEx Thermocouples with St. / Steel Head

ATEX/IECEx Thermocouples with Dual Entry Head

ATEX/IECEx Thermocouples with Terminal Entry Gland

ATEX/IECEx Spring Loaded Thermocouples

ATEX/IECEx Thermocouple Feedthroughs
ATEX/IECEx RTD Pt100 Sensors with Pot Seal

ATEX/IECEx RTD Pt100 Sensors with Die Cast Alloy Head

ATEX/IECEx RTD Pt100 Sensors with St. / Steel Head

ATEX/IECEx RTD Pt100 Sensors with Dual Entry Head

ATEX/IECEx RTD Pt100 Sensors with Terminal Entry Gland

ATEX/IECEx Spring Loaded RTD Pt100 Sensors
ATEX/IECEx 4 to 20mA Indicators

ATEX/IECEx Temperature Transmitters

ATEX/IECEx Compression Fittings

ATEX/IECEx Terminal Heads

ATEX/IECEx Pressure and Vacuum Feedthroughs



© 2006- TC Measurement and Control, Inc, PO Box 65, Hillside, IL 60162
Tel.: 877 249 1777, Fax: 708 449 0777, Email: info@tc-inc.com