Products

ATEX / IECEx Approved Thermocouples

with Spring Loaded Terminal Block

These semi rigid thermocouples are supplied with a spring loaded terminal block and can be used to replace an insert in an existing application. They can be used with service temperatures up to 1250ºC (minimum stand-off lengths must be observed).
  • Available in a wide range of protection concepts for Zones 0, 1 & 2 use. See table below for details
  • Temperature classification T6-T1, see here for stand-off requirements
  • Available in thermocouple types K, T, J, N, E, R, S and B
  • Sheath diameters from 3.0mm to 8.0mm in a wide choice of materials
  • Insulated measuring junction gives a floating output with high insulation resistance
  • Simplex, duplex and triplex sensors available
  • UKAS calibration available.
Available with the following approvals:

Protection Type Description Zone
Ex nA IIC Gc Non-Sparking (Gas) 2
Ex ia IIC Ga / IIIC Da Intrinsically Safe (Gas/Dust) 0/20



Enquiry Form

1. Thermocouple Type


2. Protection Concept


Concept Type Select
Ex ia Intrinsically Safe
Ex nA Non-Sparking

Your chosen concept is:


Ex ia Intrinsically Safe – Category 1, Zones 0,1,2 (Gas) & 20,21,22 (Dust)
• Ex ia IIC T6...T1 Ga Ta = –40°C to 60°C
• Standard EN IEC 60079-11 refers
• Designed to limit the energy of arcs or sparks that could potentially ignite an explosive mixture
• Sensors used in this area must be wired through a suitably approved barrier
• Optional approved 4 to 20mA transmitters available

Your chosen concept is:


Ex nA Non-Sparking – Category 3, Zone 2 (Gas)
• Ex nA IIC Gc T6…T2
• Standard EN IEC 60079-15 refers
• No arcs, sparks or hot surfaces

3. Sheath Material


4. Sheath Diameter


5. Sheath Length


 mm*

6. Types of Sensing Junction


Illustration Select
INSULATED Junction
Duplex Element Required? (please tick box)
Triplex Element Required? (please tick box)

7. Compression Fitting


8. Quantity Required


Contact Details


Company Name


Your Name


Email


Telephone


Additional Information


If your enquiry is for more than one style of sensor, please email us with your requirements or use the box below



Send Enquiry  
BACK TO TOP
ATEX/IECEx Thermocouples with Pot Seal

ATEX/IECEx Thermocouples with Die Cast Alloy Head

ATEX/IECEx Thermocouples with St. / Steel Head

ATEX/IECEx Thermocouples with Dual Entry Head

ATEX/IECEx Thermocouples with Spring Loaded Terminal Block

ATEX/IECEx Thermocouples with Terminal Entry Gland

ATEX/IECEx Spring Loaded Thermocouples

ATEX/IECEx Thermocouple Feedthroughs
ATEX/IECEx RTD Pt100 Sensors with Pot Seal

ATEX/IECEx RTD Pt100 Sensors with Die Cast Alloy Head

ATEX/IECEx RTD Pt100 Sensors with St. / Steel Head

ATEX/IECEx RTD Pt100 Sensors with Dual Entry Head

ATEX/IECEx RTD Pt100 Sensors with Spring Loaded Terminal Block

ATEX/IECEx RTD Pt100 Sensors with Terminal Entry Gland

ATEX/IECEx Spring Loaded RTD Pt100 Sensors
ATEX/IECEx 4 to 20mA Indicators

ATEX/IECEx Temperature Transmitters

ATEX/IECEx Compression Fittings

ATEX/IECEx Terminal Heads

ATEX/IECEx Pressure and Vacuum Feedthroughs



© 2014- TC Ltd., PO Box 130, UXBRIDGE UB8 2YS United Kingdom.
Tel.: 01895 252222, Fax: 01895 273540, Email: info@tc-atex.com







1 Thermocouple Type Temperature Range (continuous) Temperature Range
(short term)
K Nickel Chromium vs
Nickel Aluminium
0°C to +1100°C -180°C to +1350°C
T Copper vs Constantan -185°C to +300°C -250°C to +400°C
J Iron vs Constantan +20°C to +700°C -180°C to +750°C
N Nicrosil vs Nisil 0°C to +1100°C -270°C to +1300°C
E Nickel Chromium vs Constantan 0°C to +800°C -40°C to +900°C
R Platinum - 13% Rhodium vs
Platinum
0°C to +1600°C -50°C to +1700°C
S Platinum - 10% Rhodium vs
Platinum
0°C to +1550°C -50°C to +1750°C
B Platinum - 30% Rhodium vs
Platinum 6% Rhodium
+100°C to +1600°C +100°C to +1820°C
Temperature ranges refer to the thermocouple type.
The temperature range of the sensor may deviate from the above,
please refer to the product description for more details
2 Sheath Material Max.
Temperature
Standard Sheath Materials
321

321 Stainless Steel

800°C
310 310 Stainless Steel 1100°C
600 Inconel 600 1100°C
Specialized Sheath Materials
114 Nicrotherm DTM 1250°C
156 Hastelloy X 1220°C
446 AISI 446 1150°C
800 Incoloy 800 1100°C

INSULATED
Hot junction insulated from sheath. Gives floating output with typical insulation resistance in excess of 100 megohms